Other routers, switches, and Cisco IOS versions can be used. ![]() The switches used are Cisco Catalyst 2960s with Cisco IOS Release 15.0(2) (lanbasek9 image). Note: The routers used with CCNA hands-on labs are Cisco 1941 Integrated Services Routers (ISRs) with Cisco IOS Release 15.2(4)M3 (universalk9 image). Test your knowledge by trying to configure the devices without referring to the content or previous activities. This lab provides minimal assistance with the actual commands necessary to configure the router. After the configurations have been saved, you will verify your configurations by testing for network connectivity.Īfter the devices have been configured and network connectivity has been verified, you will use IOS commands to retrieve information from the devices to answer questions about your network equipment. You will then configure the devices to match the addressing table. In this lab, you will cable the equipment as shown in the topology diagram. This is a comprehensive lab to review previously covered IOS commands. Part 3: Display Device Information Background / Scenario Part 2: Configure Devices and Verify Connectivity Part 1: Set Up the Topology and Initialize Devices Last Updated on Januby Admin 6.5.1.2 Lab – Building a Switch and Router Network Answers Lab – Building a Switch and Router Network ( Answers Version)Īnswers Note: Red font color or gray highlights indicate text that appears in the instructor copy only.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |